Hi,
I have a ULPower 520iSA engine on an RV-7 and the ECU is connected with an RDAC ULP through the CANBUS with an xTreme EFIS and xTreme EMS of MGL. I also have a SP-6 and SP-7 connected to the CANBUS and an RDAC XF with the CHT and EGT TC's.
There are 2 issues (left) with my MGL xTreme EMS, when the engine runs I can see all the engine metrics on my EMS, but sometimes at irregular intervals I get 'strange' readings. For instance every few seconds I gat a 0 RPM 'glitch' of just a few tenths of a second.
The other issue is that EGT1 always reads 2000 Centigrade, which is probably above the melting point.
It's not the TC, because if I switch TC1 with TC2 still EGT1 is 2000 Centigrade.
If I reduce the number of sensors to 1 (or 2) it looks OK.
Does anyone encountered this two issues and how was it solved.
Cheers,
Marcel Heijmans
xTreme EMS 'glitching'
Forum rules
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.