Hello,
is it possible to send a GPS-NMEA 0183 via RS232.
System:
IEFIS Lite with Extender
Thank you Georg
Send a GPS-NMEA 0183 via RS232
Forum rules
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
-
Bill Hertzel
- Posts: 48
- Joined: Sun Sep 13, 2020 3:26 am
- Location: Ohio, USA
Re: Send a GPS-NMEA 0183 via RS232
In theory, by using ...
Menu>System Setup>Serial Port Routing
You can define a serial port as a "GPS NEMA Port"
I have tried to use this to send location data to my ELT but have not been successful.
I would also like to know if anyone has made this work.
Menu>System Setup>Serial Port Routing
You can define a serial port as a "GPS NEMA Port"
I have tried to use this to send location data to my ELT but have not been successful.
I would also like to know if anyone has made this work.
Re: Send a GPS-NMEA 0183 via RS232
Make sure you select the correct baudrate to be compatible with your ELT. You do this in your GPS and NMEA setup menu. The NMEA feed contains all required messages.
-
Bill Hertzel
- Posts: 48
- Joined: Sun Sep 13, 2020 3:26 am
- Location: Ohio, USA
Re: Send a GPS-NMEA 0183 via RS232
I am pretty sure I matched the baud rates, but I'll Check it again.
Thanks.
Thanks.
-
jeffnschofield
- Posts: 2
- Joined: Wed Sep 20, 2023 2:04 pm
Re: Send a GPS-NMEA 0183 via RS232
Did you get this working? I'm having the same problem.