MGL Avionics User Forum

Hi, and thanks for your reply, the engine is jabiru 2200, I THINK it is a HALL sensor mounted to count the revolutions of the flywheel to give RPM. I have used a voltmeter to trace the two wires coming from it, they are black and red, the maintenance manual says connect both to the VDO gauge, with a ...

Hi, I am installing a BLAZE EMS-2, however I am stalled at the TACHOMETER connections. There is only one, for the signal wire. The analogue Vdo gauge, which I am replacing had 4, two of which were power, leaving 2. Is there a simple way of figuring out which wire should be connected? and am I right ...

I think you are confirming what I think, the alarm is on, and working as per the start up sound, I have checked the alarms are on in the menu, so the only thing left is a steady pitot pressure. I will fit to the aircraft hopefully this week, and then just waiting for a flying day. We are in the ...

Hi, did a bench test with a 12v battery, all connected up, whole thing works great, one last question though. As per the instructions the buzzer/ light sounds as you apply power, great, however trying to replicate the low speed alarm does not work, I am trying to get it to sound at 30 knots, by ...

Thanks again, the parts should arrive today, however one thing I am not clear on is this, the diagram for wiring shows a red positive wire for power to a buzzer, and a white lead for alarm output. The buzzer only has positive and negative wires? Clearly the red goes to power, which leave the black ...

Thanks so much for your reply Stuart, I have ordered a 100db buzzer, but not sure what you mean by a +12v rail? I am mechanically orientated not electrical, with basic knowledge of 12v could you give me some pointers, the diagram for connection shows a connection for the warning light or buzzer, ok ...

Hi, just got a Vegas ASI, but have two questions, first, the connectors for the pitot and static are 5mm max diameter, which is clearly a lot smaller than the 10mm tubing already fitted to the aircraft, as long as I use a step down connector to connect the two pipes will this make any difference ...