Hi Folks...
When power is applied, should the LED light-up?????
SHould the LED blink once a connection is established to the Razor head?????
Regards
V16 Power
Forum rules
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
Re: V16 Power
Yes it should start a flash once per second.
In case it is connected via RS232 port number 2 to a A14 or A16 intercom (audio and control digital link) and all is well it will give a double flash once per second. If there is a problem on that link (unreliable connection) it will flash rapidly.
In case it is connected via RS232 port number 2 to a A14 or A16 intercom (audio and control digital link) and all is well it will give a double flash once per second. If there is a problem on that link (unreliable connection) it will flash rapidly.
Re: V16 Power
OK thank you.
I'm using a DB25 to do my wiring connection and somehow the Pin 23(gnd) on board was faulty,
the foil on the PCB board was cut/scratched so no ground. I have used Pin 22 which is interconnected.
What a relief as I thought I had scrapped the V16 somehow.
I'm using a DB25 to do my wiring connection and somehow the Pin 23(gnd) on board was faulty,
the foil on the PCB board was cut/scratched so no ground. I have used Pin 22 which is interconnected.
What a relief as I thought I had scrapped the V16 somehow.