Oil temp and pressure readings different on MX1 and EMS

Post here anything related to the MGL EFIS systems
Forum rules
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
Post Reply
Stevepattinson
Posts: 3
Joined: Fri Jul 30, 2021 1:23 pm

Oil temp and pressure readings different on MX1 and EMS

Post by Stevepattinson »

I have a single sender into a RDAC feeding both the MX1 and EMS. I am told the the RDAC is sending same data through to both units therefore should be same values. About 10 deg C difference between the two units. Any views on how to fix?
Top
sparxfly
Posts: 71
Joined: Mon Aug 31, 2020 5:57 pm
Location: Waikato, NZ
Contact:
Contact sparxfly

Re: Oil temp and pressure readings different on MX1 and EMS

Post by sparxfly »

Is the sensor configured the same on both EFIS?
Both set for the same units (C or F)?
Stuart
NZ MGL dealer
Top
Stevepattinson
Posts: 3
Joined: Fri Jul 30, 2021 1:23 pm

Re: Oil temp and pressure readings different on MX1 and EMS

Post by Stevepattinson »

Yea both set to deg C and senders set to MGL NTC
Top
Post Reply

Return to “EFIS Systems”