I have a nice setup with Discovery Lite and some additionals and self made devices (eg fake RDAC with calculation of values from primary RDAC's data).
Everything is working as expected, just my FLARM and ADS-B Data stream is not shown.
Data is NMEA from a TRX1500.
I tried several BPS from the TRX and searched settings in the EFIS
"Setup GPS and NMEA Port operation" checked all parameters
"Traffic monitoring setup" is enabled
Any ideas for places to search for?
best regards
Steffen
iEFIS ADS-B and FLARM in
Forum rules
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
Re: iEFIS ADS-B and FLARM in
You need to configure a RS232 port as FLARM (assumes 9600 baud).
Re: iEFIS ADS-B and FLARM in
Hello Rainier,
thanks for the hint, wasn't expecting 9600 for FLARM at all. tried from 19200 up.
thanks for the hint, wasn't expecting 9600 for FLARM at all. tried from 19200 up.