Hi all.
I'm just in the process of getting my head around the requirments for installation of a Trig TT21, coupled with an SP12 GPS, via the MGL interface to an iEFIS lite.
My question is (probably a really dumb one), will the iEFIS provide the TT21 with an altitude via CAN or do we still need to plumb the static port on the TT21 into the aircraft static system.
Thanks in advance.
Cheers.
Peter.
MGL transponder interface
Forum rules
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
Re: MGL transponder interface
Yes. I have a Sandia transponder that gets its altitude from the efis lite
iEFIS Discovery Lite
in a Xenos motor glider
in a Xenos motor glider
-
peterc12345
- Posts: 4
- Joined: Fri Jun 04, 2021 1:56 am
Re: MGL transponder interface
Thanks for your reply. Let's hope that works.
Re: MGL transponder interface
The transponder gets all it needs via the CAN bus from the other devices including pressure altitude for the encoder.