ADSB Parameters Erroneous

Post here anything related to the MGL EFIS systems
Forum rules
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
Post Reply
sparxfly
Posts: 71
Joined: Mon Aug 31, 2020 5:57 pm
Location: Waikato, NZ
Contact:
Contact sparxfly

Re: ADSB Parameters Erroneous

Post by sparxfly »

Thanks for the time and info- that is the same setup as my customer.
I have asked him to check on the interface status LED to confirm if it is talking to both the EFIS and the txponder- no confirmation yet.
If that checks out it leaves the software version in the transponder, as I did note a comment from another user on the forum about needing an upgrade to get things working correctly.
Stuart
NZ MGL dealer
Top
PaulSS
Posts: 67
Joined: Thu Sep 03, 2020 12:02 pm

Re: ADSB Parameters Erroneous

Post by PaulSS »

I know I updated the all the software on my iEFIS, including the transponder software before I installed anything. That was probably Dec 2020. I notice there's a newer update but I haven't installed that as my transponder is working well. Perhaps your customer may benefit from it:

http://www.mglavionics.co.za/canfirmware.html
Top
Post Reply

Return to “EFIS Systems”