Hello.
The first bug crashes and forces an efis restart: flight plan opening, selection, closing, reopening and the efis is blocked. (I believe it only does this when a raster map is displayed, not vector).
Second problem, COM control only works one way.
The frequency swich from the radio to the efis, works but not the other way around. I didn't have this problem before the update and to put ferrites (I put one at the output of the TY91 trig command box).
I have videos but was not able to upload.
Thanks for any ideas.
Iefis explorer freeze and com issues
Forum rules
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
Re: Iefis explorer freeze and com issues
Quick Update :
I fixed the com issue by moving efis connector.
Concerning the freeze issue, here is the exact pattern, with raster and vector maps : flight plan opening, selection, closing, exit, reopening and the efis freeze.
But, when I don't click close before exit, no problem... Strange!
I fixed the com issue by moving efis connector.
Concerning the freeze issue, here is the exact pattern, with raster and vector maps : flight plan opening, selection, closing, exit, reopening and the efis freeze.
But, when I don't click close before exit, no problem... Strange!
Re: Iefis explorer freeze and com issues
Hi Diamond,
I seem to be having a similar issue with my TY91. When you say you fixed it "by moving the efis connector", what exctly do you mean? Did you try a different port? Second question: are you using the SL40/Garmin protocol, or are you communicating via the TMAP/Trig interface and how did you configure that serial port?
I get uni-direction messages from my radio to the EFIS, but not the other way around (via RS232 on port 3 using SL40/Garmin).
I seem to be having a similar issue with my TY91. When you say you fixed it "by moving the efis connector", what exctly do you mean? Did you try a different port? Second question: are you using the SL40/Garmin protocol, or are you communicating via the TMAP/Trig interface and how did you configure that serial port?
I get uni-direction messages from my radio to the EFIS, but not the other way around (via RS232 on port 3 using SL40/Garmin).