MGL Avionics User Forum

It sounds like someone may have really messed up in the implementation of the servos. The only thing you should feel when moving them is just the slightest of "clicks" as the stepper motor rotates from hand movement.

.REC logging on the XTreme was deprecated and replaced with CSV logging for better compatibility with third-party tools, as well as user-readability.

This is not directly supported on the XTremes. You could actually do it rather easily by using an AUX input with the PU switch turned on for that input, then set it up as a user-defined calibration. It would show up as a "gauge" but you could still set up the alert to know if there's an issue.

Adam

Fuel Flow is captured via a turbine-wheel sensor or by capturing the trigger signals on electronic fuel injection systems. In your case, you most likely have a turbine wheel sensor. That said, I have a few questions. 1.) Does it read 20 GPH all the time no matter what? 2.) What are your current conf...

Steffen,

I think your reply ended up in an incorrect location...

Adam

Baud Rate is automatically set based on the desired function. For example, the Sandia requires 2400 baud whereas a GDL-90 ADS-B source needs 115200 baud. Note that some products such as the non-Lite iEFIS units have ports on the iBox (2-6) that are not able to use high-speed settings such as the MGL...

Do you know the age of your screen? Older Explorers that use Resistive touch screens have a calibration feature. Newer screens utilize a capacitive digitizer and do not have a calibration. Be sure your software is up to date too.

To start, I'm a huge fan of MGL. From a technical perspective, I like the design. While I was drawing up my installation documents, I was thinking about a few alterations that would appeal to me and drew them up. Just sharing to see what others think. Here are the key points I wanted to accomplish:...

The value itself will display as high and as low as the sensor value allows.

sparxfly wrote: ↑Sun May 08, 2022 8:11 pm Black to ground, red to input, pullup resisdtor ON, set sensor as LM335 type.

Sometimes Green is ground too.