MGL Avionics User Forum

Well no responses in almost 2 months so I guess no one has asked, can provide, knows anything or wants this.

Any way to get ads-b in "n number" on the panel? I know it is coming in since I can see the n number on the ads-b in wifi app from the ads-b add on. I am getting the icon on the screen with plus or minus altitude and direction but no n number.

As a follow up, I installed the 2.7 KOhm resister in series with 12 volts and the fuel pressure works as it should. I tried 5 volts and the reading was not accurate, way to low. Resistive pressure transducer works fine with RDAC CAN interface box.

Rainer, I am confused. The MGL instructions for this box as I showed above: "It is also possible to use a resistive pressure sender. In this case connect the pressure sender to the fuel pressure sender input (the other end of the fuel pressure sender variable resistor is connected to ground via the ...

Have three working fuel pressure VDO senders and trying to install another one and not getting voltage reading in the iEFIS Explorer iEFIS light panel - System Diagnostics - RDA1 diagnostics. In my simulator it has o.3 volts, I measured this 0.3 volts on one of my fuel pressure VDO senders on an air...

Similar issue but mine is related to temperature. If it gets above 70 f in the cockpit, it starts graying out. I go in and change the screen brightness, back to normal for 3 to 5 seconds than pops back to graying out. The hotter, the worse. Summer at 80 f unusable. Starts ok but as it heats up gets ...

I have an iEFIS light (small size) and each time I turn the power off the hobbs meter keeps resetting to 0 and the Transponder resets to 4546. Typically these hold there last value. How do I get them to keep the values?

Just updated my Navidata on a iEFIS Gen 3 Challenger and after selecting a waypoint the airport frequencies do not come up as they did before. Went back and installed an old 2019 Navidata file and the airport frequencies DID come up. So it appears in the new updated Navidata download the airport fre...

Thanks.
Greatly appreciated.
Guess I should have looked harder. Anyway.......
Most of my students want to use this as a simulator and I/we appreciate both the simulator and the ability to modify the screens.
Best,
Paul

Yes I looked there before and now again, it still is not odious to me and to others.
Could you please tell me under which sub tab in the Firmware and supply a direct link.