Search found 647 matches

by rainier
Fri May 03, 2024 11:32 am
Forum: EFIS Systems
Topic: IEFIS Chalenger audio
Replies: 2
Views: 96

Re: IEFIS Chalenger audio

Effectively this has been moved to the individual item - for example if you want alarms for oil pressure you go to the oil pressure setup menu and you will then find a setting what to do in case of alarm including audio. There is no need to select the phrases as we did with the old systems. The idea...
by rainier
Thu May 02, 2024 11:17 am
Forum: EFIS Systems
Topic: AMOLED SCREEN
Replies: 3
Views: 154

Re: AMOLED SCREEN

Retina display is a simply a branded display by Apple - it's nothing special at all. Most of them are IPS (In-plane switching). AMOLED tends to be used for very small displays such as on watches and is related to OLED displays which tend to be used for large displays now. However these are not yet i...
by rainier
Thu May 02, 2024 10:51 am
Forum: MGL Radio frequency products
Topic: T16 Transponder
Replies: 9
Views: 1223

Re: T16 Transponder

No not yet - we first need to complete FCC certification and obtain the FAA approval letter - before that it is not possible to sell them.
by rainier
Tue Apr 30, 2024 7:47 am
Forum: EFIS Systems
Topic: iEFIS Explorer RF from display
Replies: 1
Views: 85

Re: iEFIS Explorer RF from display

The issue is not your EFIS - the issue is your RF installation is not up to scratch. If you have a properly tuned antenna (correct ground plane is super critical here) and the required distance (FCC requires 2 meters from any person) to the EFIS panel then there will be no nolse. The problem is that...
by rainier
Tue Apr 30, 2024 7:25 am
Forum: EFIS Systems
Topic: iBox V2 static leak SOLVED
Replies: 1
Views: 78

Re: iBox V2 static leak SOLVED

The nipples are slightly rough. we tend to use soft neoprene tubing which seals very well -= PVC in particular thick walled tubing can be very hard and then it may not seal that well. A very small amount of silicon sealant (RTV is good) smeared around the nipple (don't block the hole) works well.
by rainier
Tue Apr 30, 2024 7:21 am
Forum: EFIS Systems
Topic: AMOLED SCREEN
Replies: 3
Views: 154

Re: AMOLED SCREEN

I do not think these are amoled displays - at best they are IPS, same as the one used in your Challenger. If you can't read your plates - it's not the display - it's the resolution the images where converted at. If the conversion has been done correct the images will appear crisp. If these are low r...
by rainier
Mon Apr 29, 2024 8:14 am
Forum: Technical - floobidust
Topic: USB Com Port Extender
Replies: 1
Views: 89

Re: USB Com Port Extender

There is no replacement for the COM port extender. It's not your standard USB to serial converter at all.
by rainier
Fri Apr 26, 2024 1:42 pm
Forum: EFIS Systems
Topic: mgl discovery lite and rdac xf
Replies: 8
Views: 255

Re: mgl discovery lite and rdac xf

Please refer to the RDAC installation manual with respect to grounding as this is very important. In a nutshell - the RDAC must get its power supply ground directly from the engine block and nowhere else as otherwise it cannot measure any sensor that uses the engine block as ground accurately. The g...
by rainier
Fri Apr 26, 2024 9:45 am
Forum: EFIS Systems
Topic: ADSB-in and out with a Voyager Odyssey G2
Replies: 7
Views: 186

Re: ADSB-in and out with a Voyager Odyssey G2

The Enigma would be used to send NMEA data (i.e. standard GPS messages) to your transponder. This has nothing to do with GDL90. There are no plans to reuse the old Odyssey and Voyager housings to create a new EFIS - simply because of the use of touch screens and there being no more use for keypads m...
by rainier
Fri Apr 26, 2024 9:32 am
Forum: EFIS Systems
Topic: Enigma error messages
Replies: 1
Views: 72

Re: Enigma error messages

This means it is not able to read the flash memory chip on the CPU board - you have two of them. This contains the Enigma application and is also used to create a disk to hold data such as your screen files etc. The most common issue on these boards is due to them being built with lead free solder. ...