MGL Avionics User Forum

I fixed my SP9 problem by removing the rubber shock mounts and mounting the SP9 on Velcro directly to the shelf then putting a small nylon tie strap for double backup over the SP9 using 2 holes through the mounting shelf. The mounting shelf was rigid as designed and didn't need any changes. Only new...

Did you get your question answered? If not ill send you my GTX-327 wiring diagram!

Cecil

Hi, I believe there was much discussion several years ago about Intermittent traffic from the Echo UAT, I think a software upgrade on the Echo helped to fix this issue. I would check your software release number on the echo ( uses a Wifi enabled app) and then call UAVIONIX and ask them about the pro...

If you send me the coordinates in your data base for your airport, and the airport identifier i will check on google earth and compare. Coordinates pulled from Google earth i have found to be less than 3 meters. You can check yourself also. I check/verify Google Earth accuracy (coordinates) by looki...

I would say yes, it needs to goto the iBox Analog Gnd for that Sense Input. At least that's what i did and have had no problems with this.

Cecil


Cecil

Good questions 1. I have a iEFIS Challenger (RV8 front seat) and Explorer in the backseat. I have a separate power switch for iEFIS and iBox but they are powered through same respective CB's for primary and backup power inputs Backseat powered through Aux circuit). With a separate switch I can power...

I really do use a schematic program for dummies, it's called Microsoft paint!! I can copy and paste from any other drawing to mine really quick, and the learning curve was quick...

Green Diode is a Green LED backup power on light.

OK, the schematic below includes my Alternator and main battery, i also have a Backup Alternator,, the Backup battery has a 10Amp CB-Switch which turns it on, and a 5Amp CB from the Avionics Bus that will charge it in flight (with reverse current Diode), and is connected to the iEFIS through Backup ...

Following is my wiring for the Roll Trim, Pitch Trim works the same, My pitch trim is wired into a SP10 that controls both Flaps and Pitch trim, so has a different setup. Hope this helps. I have to reduce the Schematic resolution to get it to load on the forum, but can email directly if you send me ...

I can't seem to make any of my G3 Challenger graphics to successfully overlay any of my NTSC video inputs? I've tried many different custom graphics design variations and/or attitude displays options and I get either only video or only graphics, but no graphics overlay over the video? As is often th...