MGL Avionics User Forum

Were you ever able to resolve your issue? I am having the same problem with the Westach where the temperature shows 0°C or 32°F for any value below 20°C or 68°F. It's rather annoying that you wouldn't be able to see a temperature rise when applying carb heat until it reaches 20 degrees.

Hi everyone,

I have an MGL Odyssey with a UMA hall effect sensor connected to the Mag and a 22k resistor. I'm not sure if there should be a delay in the RPM reading, but it seems like there is about a 4-5 second delay when I push or pull the throttle. Is this normal? Thank you.

Were you able to fix your problem? I am having the same exact issue

Thank you Rainier. So far I tested by turning the prob by hand and the voltmeter indicates between 0-12v on each turn. I read through the forum and almost exhausted all the options. I also tested with 10k and 22k resistors with no luck. I rechecked all the wiring and even added a heavier Guage groun...

Were you able to solve your issue? I am facing the same exact problem with my odyssey and wondering of somone was able to figure it out

Hi everyone, I have a project that came with Odyssey and RDAC XB. I installed everything and the RDAC works fine with the other sensors except the RPM. I installed UMA sensor with slick mag and tried all the settings with and without ballast jumpers and no luck. Every time I try to test by tuning th...